Pablo Posted March 12, 2011 Report Share Posted March 12, 2011 Looking for really good/stiff nylon/polymer bore brushes. Anyone have a good source? I want to brush my bores but not with bronze/brass brushes. Frankly some of the metal brushes on the market are junk. Quote Link to comment Share on other sites More sharing options...
BarryinIN Posted March 12, 2011 Report Share Posted March 12, 2011 I don't know if any of the nylon (or similar material) brushes will stand up to bore solvents. The ammonia in most bore solvents will eat away the bronze/brass ones, but not as fast as most solvents eat the plastic ones in my experience. The brush might start out .45 caliber, but end up a .40 quickly! I would look here though:http://www.champchoice.com/cat-Brushes-293.aspxI get my bronze brushes from them (their in house brand) and like them a lot, and I think they might have nylon if you look around there. I know they used to, but don't know now. BTW, That place (Champion's Choice) isn't a bad place to have bookmarked anyway. They are target shooting oriented, so don't have everything for general shooting, but are good about what they have. I started using them when I was shooting Highpower, and at the time, they couldn't be beat on a lot of things we used. They were higher on some things, but often beat everyone else by a good margin on lots of others, so were pretty good overall. Here's another that is very similar:http://www.championshooters.com/ Quote Link to comment Share on other sites More sharing options...
Pablo Posted March 12, 2011 Author Report Share Posted March 12, 2011 I just got back from a local gun show - a couple vendors had stainless steel brushes. No thanks! No one had plastic brushes. I would stick with Ballistol and ammoniated cleaners so as not to digest them too rapidly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.